Lar / Centro de produtos / Mangueiras hidráulicas padrão SAE/DIN / Mangueira hidráulica trançada de fio de aço / SAE 100R2/DIN EN853 2SN

SAE 100R2/DIN EN853 2SN

SAE100 R2 AT / DIN EN853 2SN Mangueira hidráulica trancada de fio de aço do padrão SAE/DIN

Superfície enrolada/lisa

Camada interna de borracha: borracha especial com boa resistência a óleo

Camada de reforço: duas camadas trancadas de fio de aço revestido a cobre de alta resistência

Camada externa de borracha: borracha especial resistente a atrito e intempéries

Faixa de temperatura: -40°C a +125°C

Finalidade: para transporte de fluidos hidráulicos e fluidos à base de água

Observação: 1-1/4", 1-1/2", 2" esses três modelos são apenas para mangueiras enroladas

Informe-se agora Próximo produto

Especificação

Specification

HOSE ID		Wire OD	Hose OD	Working Pressure		Burst Pressure		Minimum Bend Radius	Weight
Inch	mm	mm	mm	MPa	Psi	MPa	Psi	mm	mm
3/16	4.8	11.1	13.4	41.4	6000	165	23720	90	0.31
1/4	6.4	12.7	15.0	40.0	5800	160	22840	100	0.33
5/16	7.9	14.3	16.6	36.0	5250	140	20000	115	0.39
3/8	9.5	16.7	19.0	33.1	4800	132	18840	130	0.50
1/2	12.7	19.8	22.2	27.6	4000	110	15720	180	0.59
5/8	15.9	23.0	25.4	25.0	3630	100	14280	200	0.71
3/4	19.0	27.0	29.3	21.5	3120	85	12280	240	0.86
1	25.4	34.9	38.0	16.5	2400	65	9420	300	1.28
1-1/4	31.8	44.5	48.3	12.5	1820	50	7140	420	2.02
1-1/2	38.1	50.8	54.6	9.0	1310	36	5140	500	2.23
2	50.8	63.5	67.3	8.0	1160	32	4560	630	2.85

SAE 100R2 Hydraulic Hose

SAE 100R2 Hydraulic Hose is made of oil-resistant tubing and is suitable for transporting petroleum-based hydraulic fluids. In addition, it can transport oil without excessive heat and leakage. It is mainly used for some mobile equipment, such as agricultural tractors, dump trucks and in-plant hydraulic equipment.

It consists of three parts: tube, reinforcement and cover. The tube is made of oil-resistant synthetic rubber, so it is mainly used for transporting oil. The reinforcement is made of two layers of high-strength braided steel wire, which makes the hose structurally strong and resistant to high pressure. Therefore, it has excellent performance under high pressure working environment. The outer cover is made of high-quality synthetic rubber, which is weather-resistant, ozone-resistant, corrosion-resistant, abrasion-resistant, aging-resistant, sun-resistant, and cut-resistant. The hose thus has a longer service life.

Product Description

Wrapped Cover / Smooth Cover

INNER TUBE: oil resistant synthetic rubber

REINFORCEMENT: two high tensile steel wire braids

COVER: abrasion and weather resistant synthetic rubber

TEMPERATURE RANGE: -4℃to +100℃

APPLICATIONS

Hose range suitable to carry hydraulic fluids such as glycol, mineral oils、fuels、lubrication、emulsion、hydrocarbons etc.

produtos relacionados

SAE 100R3 (Wrapped Cover / Smooth Cover)

INNER TUBE: oil resistant synthetic rubber
REINFORCEMENT: double high tensile fibre braids
COVER: abrasion and weather resistant synthetic rubber
TEMPERATURE RANGE: -4℃ to +100℃

Veja mais
SAE 100 R15 (Wrapped Cover / Smooth Cover)

INNER TUBE: oil resistant synthetic rubber
REINFORCEMENT: four or six spirals of high tensile steel wire
COVER: abrasion and weather resistant synthetic rubber
TEMPERATURE RANGE: -4℃ to +125℃

Veja mais
SAE 100 R13

wire-wound hydraulic hoses can withstand higher working pressures than wire-reinforced hydraulic hoses. Therefore, the hose has outstanding performance in ultra-high pressure environment. The cover is made of high quality black synthetic rubber, which makes the hose resistant to abrasion, corrosion, cutting, weather, ozone, aging and sunlight.

Veja mais

Tag:

Hydraulic Hose

Parceiros