Common Defects in Hydraulic Hoses: Identifying and Preventing Issues

05. 18, 2023

Hydraulic hoses are prone to certain defects that can compromise their performance and jeopardize the safety of hydraulic systems. Understanding these common defects is crucial for timely detection, prevention, and maintenance. In this article, we will explore the most prevalent issues that can occur in hydraulic hoses, providing insights into identifying and preventing these defects.


Hydraulic Hose

 

Abrasion and Wear

 

One of the most common defects in hydraulic hoses is abrasion and wear. Hoses can rub against other components or surfaces, leading to damage over time. This defect is often caused by incorrect routing, improper installation, or inadequate protection measures. Signs of abrasion include flattened or exposed reinforcement layers, fraying or thinning of the outer cover, and leakage. Regular visual inspections, proper hose routing with clamps or guards, and selecting hoses with higher abrasion resistance can help prevent this issue.

 

Leakage

 

Leakage is a significant defect that compromises the integrity of hydraulic hoses. It can occur due to various factors such as damaged fittings, loose connections, degraded seals, or punctures in the hose. Leaks not only result in fluid loss but also lead to decreased system efficiency and potential safety hazards. Regular inspections, tightening fittings, replacing damaged seals, and promptly repairing or replacing leaking hoses are essential preventive measures. Using proper torque values during installation and avoiding over-tightening is critical to preventing leakage.

 

Bursting and Blowouts

 

Bursting and blowouts can be catastrophic and are typically caused by excessive pressure or aging of the hose. Overloading a hose beyond its recommended pressure rating can cause it to burst, resulting in high-velocity fluid discharge. Additionally, hoses that have exceeded their service life may become brittle and prone to failure. Regular inspections, adhering to pressure rating guidelines, and replacing hoses at recommended intervals can mitigate the risk of bursting or blowouts. Employing pressure relief valves and protective shields further enhance safety.


Hydraulic Hose

 

Impacts of High Temperatures and Chemicals

 

Extreme temperatures and exposure to chemicals can adversely affect hydraulic hoses. High temperatures can cause the hose to degrade, leading to reduced flexibility and increased vulnerability to abrasion or bursting. Chemicals such as oils, solvents, or corrosive substances can deteriorate the hose material, compromising its strength and integrity. Selecting hoses designed to withstand high temperatures and chemical exposure, implementing proper insulation and shielding measures, and regular inspection for signs of degradation or chemical damage are essential preventive measures.

 

Conclusion

 

Being aware of the common defects in hydraulic hoses is vital for their proper maintenance and safe operation. Abrasion and wear, leakage, bursting, and blowouts, as well as the impacts of high temperatures and chemicals, are among the most prevalent issues. By conducting regular inspections, employing preventive measures, and adhering to recommended pressure ratings and replacement intervals, industries can enhance the longevity and safety of hydraulic hoses, ensuring efficient performance and minimizing the risk of system failures. We are a hydraulic hose supplier. If you are interested in our products, please contact us now!

Produtos quentes

  • SAE 100R1/DIN EN853 1SN

    SAE 100R1/DIN EN853 1SN

    SAE 100 R1 steel wire reinforced hydraulic hose is suitable for hydraulic lines and usual industrial systems. It can bear higher working pressure than other rubber hoses thanks to its high tensile braided steel wire reinforcement. It is composed of three parts: tube, reinforcement and cover.
  • SAE 100R2/DIN EN853 2SN

    SAE 100R2/DIN EN853 2SN

    SAE 100R2 Hydraulic Hose is made of oil-resistant tubing and is suitable for transporting petroleum-based hydraulic fluids. In addition, it can transport oil without excessive heat and leakage. It is mainly used for some mobile equipment, such as agricultural tractors, dump trucks and in-plant hydraulic equipment.
  • DIN EN856 4SP

    DIN EN856 4SP

    INNER TUBE: oil resistant synthetic rubber
    REINFORCEMENT: four spirals of high tensile steel wire
    COVER: abrasion and weather resistant synthetic rubber
    TEMPERATURE RANGE: -4℃ to +100℃

Parceiros

  • KOTAI

  • ZOOMLION

  • CFANGLIN

  • LIUGONG

  • LONKING

  • SANY

Consulte agora

Veja mais informações do produto

Contacte-nos

Telefone: +86 400 0318 111

E-mail: admin@sanyeflex.com

Endereço: No.218 Rua Zhongke, Zona de Alta Tecnologia, Cidade de Hengshui, Província de Hebei, China

© Hebei Sanye Tecnologia de Fluídos Limitada Todos os direitos reservados | Mapa do site